AI for Engineers
Join the Community
Back to the News Desk

Category

Applications

74 articles

When should you use RAG, TAG, and RAFT AI?

When should you use RAG, TAG, and RAFT AI?

Jeff Shepard May 13, 2026

Retrieval-augmented generation (RAG) and table-augmented generation (TAG) are both techniques to improve the ability of artificial intelligence (AI) to generate accurate and relevant information by leveraging external data. Other choices include retrieval-augmented fine-tuning (RAFT) and retrieval-centric generation (RCG).

Read article →
Grinn introduces 8-core SBC supporting AI-ready embedded development

Grinn introduces 8-core SBC supporting AI-ready embedded development

Redding Traiger August 5, 2026

Grinn has introduced the GenioBoard, a single-board computer (SBC) designed to accelerate the development of embedded and AI-capable systems. Built around the MediaTek Genio family of processors, the board integrates compute performance, connectivity, and security within an 87 mm × 56 mm form factor. It supports both the Grinn GenioSOM-700 and GenioSOM-510 systems-on-module, each offering…

Read article →
Liquid Instruments showcases hardware platform and generative HDL coding tool

Liquid Instruments showcases hardware platform and generative HDL coding tool

Aimee Kalnoskas May 28, 2026

At DesignCon 2026, Liquid Instruments displayed the Moku:Delta hardware platform and a new AI tool called Generative Instrumentation. Moku:Delta is a meaningful hardware upgrade over its predecessor, featuring eight channels instead of four, a larger FPGA, improved analog input noise performance, and QSFP ports that support high-speed data streaming up to 80 Gbps. The device […]

Read article →
Researchers use AI to study magnetic loss in electric motor materials

Researchers use AI to study magnetic loss in electric motor materials

Michelle Froese June 29, 2026

Researchers at Tokyo University of Science have developed an AI-powered physics model that could help improve understanding of magnetic energy loss in electric motor materials, a factor that affects motor efficiency in electric vehicles (EVs) and other electrified systems. Electric motors experience iron loss, also known as magnetic hysteresis loss, when magnetic fields inside the…

Read article →
AdapSkin stretchable sensor improves AI-driven prosthetic control

AdapSkin stretchable sensor improves AI-driven prosthetic control

Rachael Pasini June 29, 2026

Michigan State University recently released news on its AdapSkin wearable sensor platform, which collects biological data more accurately to improve responsive assistive devices. Skin-interfaced wearable health technology has a hidden flaw: Many systems work best on smoother skin, which tends to be on younger bodies, not the older adults who often need them most. This…

Read article →
Edge AI systems deliver up to 157 TOPS

Edge AI systems deliver up to 157 TOPS

Puja Mitra June 21, 2026

Aetina Corporation has introduced its Mini Series Edge AI systems, including the AIE-CO23/33-S1, AIE-CN33/43-A1, AIB-MO23/33-S1 and AIB-MN33/43-S1, built on NVIDIA Jetson Orin Nano with Super Mode and Jetson Orin NX modules for vision AI and generative AI inference at the edge. The systems offer compact fanless designs, support up to 100 TOPS or 157 TOPS […]

Read article →
What are the top programming languages for machine learning?

What are the top programming languages for machine learning?

Nikhil Agnihotri August 6, 2026

Artificial intelligence (AI) and machine learning (ML) are continuing to become more mainstream and you’ll find the technology in everything from your smartphone apps and computer programs to smart tech and appliances, and automobiles (think self-driving cars). These technologies are no longer confined to scientific computing and statistical research but have, for the most part, become a…

Read article →
What are the top development boards for AI and ML?

What are the top development boards for AI and ML?

Nikhil Agnihotri August 5, 2026

Machine learning (ML) and artificial intelligence (AI) are no longer limited to high-end servers or cloud platforms. Thanks to new developments in integrated circuits (IC) and software technology, it’s possible to implement ML algorithms and deep learning neural networks on tiny controllers and microcomputers. And these embedded devices installed at edges must no longer rely…

Read article →
What’s the symbiosis between AI and solid-state transformers?

What’s the symbiosis between AI and solid-state transformers?

Jeff Shepard June 28, 2026

There’s a critical symbiosis between artificial intelligence (AI) and solid-state transformers (SSTs), especially in hyperscale data centers, green energy systems, and electric vehicle (EV) infrastructure. Those applications increasingly rely on SSTs to maximize efficiency, and SSTs use AI to monitor, manage, and optimize complex grid dynamics and power conversion. Individual AI computing clusters in hyperscale […]

Read article →
What are the types of AI chips and how are they classified?

What are the types of AI chips and how are they classified?

Nikhil Agnihotri July 25, 2026

The demand for artificial Intelligence (AI) chips is increasing due to their suitability in certain AI applications. This development mirrors the rise of Graphic Processing Units (GPUs) for 3D applications years ago. However, traditional CPUs and even GPUs often fall short in handling the unique demands of AI workloads, prompting the emergence of AI-specific chips.…

Read article →
OpenClaw is open-source edge AI for (almost) every application

OpenClaw is open-source edge AI for (almost) every application

Jeff Shepard June 29, 2026

OpenClaw is being touted as the “operating system for personal AI.” It’s being supported by a wide array of companies, including NVIDIA. Target applications range from generative and agentic AI in consumer devices like smartphones, edge applications like medical devices, and physical AI (PAI) in robotics. Formerly called Clawdbot, OpenClaw is designed to fill a […]

Read article →
How does AI use sensors for object recognition?

How does AI use sensors for object recognition?

Randy Frank June 17, 2026

In addition to its use in facial recognition, artificial intelligence (AI) also plays a critical role in advancing object recognition. Perhaps one of key and leading-edge applications for AI is in image recognition and diagnostics in healthcare. According to a technology assessment report published by the U.S. Government Accountability Office (GAO) with content from the […]

Read article →
How do sensors play into AI’s facial recognition capabilities? Part 1

How do sensors play into AI’s facial recognition capabilities? Part 1

Randy Frank June 17, 2026

Among the growing number of applications for artificial intelligence (AI) is advanced imaging capabilities for reliable facial recognition. Reliability is required for effective analysis by law enforcement agencies, access to commercial or industrial complexes, travel, or even a homeowner. While AI enables complex analysis and performs it in a remarkably short timeframe, effective analysis requires […]

Read article →
How does artificial intelligence relate to immersive audio?

How does artificial intelligence relate to immersive audio?

Jeff Shepard June 17, 2026

Tools like neural networks (NNs), machine learning (ML), and artificial intelligence (AI) are being applied to hard problems related to immersive audio. This FAQ will examine how NNs and ML are being used to up-mix audio tracks into their original constituent parts, how NNs are being used to produce personalized head-related transfer functions (HRTFs) and […]

Read article →
How TLVRs support extreme power demands in AI datacenters

How TLVRs support extreme power demands in AI datacenters

Jeff Shepard June 26, 2026

Trans inductor voltage regulators, occasionally referred to as transient load voltage regulators, (TLVRs) use coupled inductors with an additional secondary winding to create a series-connected secondary loop, allowing all phases to react simultaneously to load changes. That enables TLVRs to support the extreme power demands of GPUs in AI datacenters, and as detailed below, they […]

Read article →
What kinds of PAI dev kits are available for humanoid robotics?

What kinds of PAI dev kits are available for humanoid robotics?

Jeff Shepard June 17, 2026

Physical artificial intelligence (PAI) development kits for humanoid robotics range from high-end, industrial-grade platforms to prosumer and educational, modular do-it-yourself (DIY) kits, Raspberry Pi-based options, and more. Some kits are suited for specific functions like walking and navigation, using AI to understand natural language, sensor fusion, power conversion, and motion control, and handling objects in […]

Read article →
What are the applications of physical artificial intelligence?

What are the applications of physical artificial intelligence?

Jeff Shepard May 12, 2026

Physical artificial intelligence (PAI) enables machines to perceive, reason, and act within the real world, bridging the gap between digital AI (DAI), sometimes called virtual AI, and physical action. PAI often leverages spatial artificial intelligence (SAI) technology. PAI applications span numerous industries, from basic automation to autonomous vehicles and complex surgical procedures. PAI applications represent […]

Read article →
What AI acceleration techniques are used for embedded devices?

What AI acceleration techniques are used for embedded devices?

Nikhil Agnihotri June 29, 2026

Artificial Intelligence (AI) is no longer confined to data centers. Today, AI is widely used and implemented in edge devices, smartphones, and embedded systems. This has been made possible through hardware and software acceleration methods that work together within embedded systems. It’s now feasible to run small machine-learning models on low-power, resource-constrained microcontroller units without…

Read article →
How to calculate efficiency across the AI power chain

How to calculate efficiency across the AI power chain

Jeff Shepard June 27, 2026

Like many aspects of artificial intelligence (AI), there’s not a single approach when calculating efficiency across the AI power chain. It depends on where you look. Are the calculations related to the facility layer, the compute and hardware layer, or the workload and algorithm layer? At the facility level, efficiency is discussed in terms of […]

Read article →
How does the open domain-specific architecture relate to chiplets and generative AI?

How does the open domain-specific architecture relate to chiplets and generative AI?

Jeff Shepard June 17, 2026

The Open Domain-Specific Architecture (ODSA) is a project within the Open Compute Project (OCP) community to establish open physical and logical die-to-die (D2D) interfaces for chiplets. The goal is to democratize the design and use of chiplets for domain-specific high-performance computing (HPC) applications like generative artificial intelligence (AI). Domain-specific architectures (DSAs) are an emerging approach […]

Read article →
What is new in UCIe 3.0?

What is new in UCIe 3.0?

Jeff Shepard June 4, 2026

Universal Chiplet Interconnect Express (UCIe) 3.0 is focused on increased bandwidth, improved power efficiency, and enhanced system-level management for next-generation chiplet-based designs. It’s designed to support artificial intelligence and high-performance computing while maintaining backward compatibility with UCIe 2.0 and 1.0.

Read article →
How ML and AI work in power conversion: part 2

How ML and AI work in power conversion: part 2

Jeff Shepard May 28, 2026

This article digs into how machine learning (ML) and artificial intelligence (AI) contribute to the optimization of green energy systems and electric vehicles (EVs). It looks at a few of the ways ML/AI enable designers to deploy dynamic models that learn from experience, and handle non-linearities and changing, complex conditions better than fixed algorithms. Part […]

Read article →
How do ML and AI work in power conversion? part 1

How do ML and AI work in power conversion? part 1

Jeff Shepard May 28, 2026

The use of machine learning (ML) and artificial intelligence (AI) in power converters represents the latest development in the field of digital power. They are being used in advanced converter control schemes, performance monitors of electrolytic capacitors to support preventative maintenance, and power management systems to improve efficiency and enhance reliability.

Read article →
How can AI enhance DVFS in processor power management?

How can AI enhance DVFS in processor power management?

Jeff Shepard May 28, 2026

Dynamic voltage and frequency scaling (DVFS) is a common energy-saving technique used in computer processor ICs based on the quadratic relationship between power consumption and operating voltage and the linear relationship between power consumption and frequency. It reacts to changing operating demands on the processor to minimize energy consumption. The addition of artificial intelligence (AI) […]

Read article →
How do AI agents and model context protocol work together?

How do AI agents and model context protocol work together?

Jeff Shepard May 13, 2026

An AI agent, combined with a model context protocol (MCP), can create more contextual AI systems that can perform a wide range of tasks, from automating processes to providing insights and interacting with users. MCP helps AI agents connect to data sources, enabling them to access information, collaborate with other systems, and make decisions based on real-time data.

Read article →
What type of interconnects and connectors link accelerator cards in AI data centers?

What type of interconnects and connectors link accelerator cards in AI data centers?

Aharon Etengoff May 13, 2026

Many data centers are packed with racks of high-performance graphics processing units (GPUs) and tensor processing units (TPUs). These accelerators process massive artificial intelligence (AI) and machine learning (ML) datasets, executing complex operations in parallel and exchanging data at high speed. This article explores the interconnects and connectors that link AI accelerator clusters together.

Read article →
How do heterogeneous integration and chiplets support generative AI?

How do heterogeneous integration and chiplets support generative AI?

Jeff Shepard June 17, 2026

Chiplets are here, and more are coming. They can overcome the yield limitations of large ASICs, support a mix-and-match strategy for heterogeneous semiconductor IPs and multiple process nodes, improve thermal performance, and speed time to market. They are being used in a range of high-performance computing (HPC) applications, notably generative artificial intelligence (AI) and machine […]

Read article →
How twin axial cable assemblies support high-performance computing for AI/ML systems

How twin axial cable assemblies support high-performance computing for AI/ML systems

Jeff Shepard June 17, 2026

The high-performance computing platforms used for artificial intelligence (AI) and machine learning (ML) in hyperscale data centers need high-speed interconnects like 112 Gbps PAM 4 and faster inside the servers. High-speed interconnects are also required between the servers and storage devices. Twin axial (Twinax) cable assemblies are one way to address those needs. This article […]

Read article →
Beyond SDVs: how AI optimizes electric vehicles

Beyond SDVs: how AI optimizes electric vehicles

Aharon Etengoff June 17, 2026

Many automotive manufacturers classify new cars and trucks as software-defined vehicles (SDVs). As SDVs by design, electric vehicles (EVs) optimize vital systems and functions with sophisticated artificial intelligence (AI) and machine learning (ML) capabilities. This article discusses AI’s crucial role in EVs, from smart charging and advanced driver assistance systems (ADAS) to predictive maintenance and…

Read article →
Accelerating high-performance AI workloads with photonic chips

Accelerating high-performance AI workloads with photonic chips

Aharon Etengoff May 13, 2026

Artificial intelligence (AI) and machine learning (ML) continue to push the limits of conventional semiconductor architectures. To increase speeds, lower latency, and optimize power consumption for high-performance workloads, semiconductor companies, and research institutions are developing advanced photonic chips that operate on the principles of light rather than electrical currents.

Read article →
How does the IEEE MagNet Challenge use AI for power magnetics modeling?

How does the IEEE MagNet Challenge use AI for power magnetics modeling?

Jeff Shepard March 27, 2026

The IEEE Power Electronics Society (PELS) Google-Tesla MagNet Challenge is an annual competition. It’s designed to accelerate innovation in magnetic modeling using artificial intelligence (AI). This article reviews some of the highlights from the first two MagNet Challenges in 2023 and 2024. The first installment ran from February to December 2023, with the winners announced […]

Read article →
Assistive robotics and AI: How ATDev is transforming mobility and independence

Assistive robotics and AI: How ATDev is transforming mobility and independence

Mike Santora May 28, 2026

As advances in AI and robotics accelerate, the conversation around independence is being fundamentally reshaped. What does it truly mean to live autonomously in 2026, and how can technology support that vision without replacing the human experience? In this interview, ATDev’s Todd Roberts and Owen Kent explore a new paradigm: one where assistive devices don’t take over, but instead collaborate with users to enhance everyday life.

Read article →
Bridging theory and reality in wireless communications: a candid talk with Andrea Goldsmith

Bridging theory and reality in wireless communications: a candid talk with Andrea Goldsmith

Emma Lutjen May 28, 2026

In this wide-ranging conversation, Andrea Goldsmith reflects on a career that has helped define modern wireless communications, from foundational work in channel capacity and adaptive modulation to shaping MIMO, AI-driven systems, and the road to 6G. One of the field’s most influential voices, and recipient of the 2025 IEEE Mildred Dresselhaus Medal for her contributions to and leadership in wireless communications theory and practice (just one of many honors in a career spanning academia, industry, and university leadership), she speaks candidly about her foundational work in the industry, the importance of diversity, and the need for boldness and collaboration in driving engineering excellence.

Read article →
Designing Beyond AI: ATDev’s human-centered solution for flying in a power wheelchair

Designing Beyond AI: ATDev’s human-centered solution for flying in a power wheelchair

Mike Santora May 28, 2026

Engineers often rely on AI and advanced tools to solve complex problems, but some challenges still demand lived experience and hands-on design. In this transcript from a recent Mind Over Machine Q&A interview, Design World managing editor Mike Santora talks with Todd Roberts and Owen Kent of medical technology startup ATDev, a company focused on assistive solutions born out of real-world needs. The conversation centers on the gap between what AI can optimize on a screen and what people with disabilities actually face in everyday life, especially when traveling.

Read article →
Edge AI without the guesswork: designing for real battery life, real performance, and real workloads

Edge AI without the guesswork: designing for real battery life, real performance, and real workloads

Aimee Kalnoskas June 17, 2026

Edge AI is no longer experimental. From wearables and medical sensors to smart home devices, industrial monitors, and infrastructure nodes, products are increasingly expected to sense, analyze, and make decisions locally while operating for months or even years on small batteries. This requirement has turned ultra-low-power system design into one of the most complex challenges […]

Read article →
How “green” is your Artificial Intelligence?

How “green” is your Artificial Intelligence?

Jeff Shepard June 14, 2026

Artificial intelligence (AI) systems face a set of conflicting goals: being accurate (consuming large amounts of computational power and electrical power) and being accessible (being lower in cost, less computationally intensive, and less power-hungry). Unfortunately, many of today’s AI implementations are environmentally unsustainable. Improvements in AI energy efficiency will be driven by several factors, including […]

Read article →
Mind over Machine: AI vs. Human Insight: What’s Missing?

Mind over Machine: AI vs. Human Insight: What’s Missing?

Mike Santora May 28, 2026

In an era where artificial intelligence is rapidly reshaping how we work, communicate, and make decisions, it’s easy to assume that nearly every challenge has a data-driven solution. But as powerful as these tools have become, there are still critical gaps, e specially when it comes to human interaction. The nuances of conversation, the unspoken signals, and the subtle disconnects between what is said and what is meant remain difficult for even the most advanced systems to fully interpret.

Read article →
Mind over Machine: The engineering problem AI couldn’t solve

Mind over Machine: The engineering problem AI couldn’t solve

Mike Santora June 26, 2026

In this episode of Mind Over Machine, Mike Santora speaks with Ship & Shore Environmental President and CEO Anoosheh Oskouian about the role of human experience in engineering and manufacturing as artificial intelligence becomes more common across industries. The discussion centers on the limits of AI-driven problem solving, the importance of observation and intuition, and…

Read article →
VIDEO: AI and language translation, turning multilingual chaos into operational clarity

VIDEO: AI and language translation, turning multilingual chaos into operational clarity

Mike Santora May 28, 2026

In this video interview, Mike Santora, Managing Editor of Design World, sits down with Falk Gottlob of Smartcat to explore how AI-powered language orchestration is transforming global manufacturing. While translation has long been treated as a back-end task, Gottlob explains why it’s actually central to operational speed, safety, and compliance. From technical manuals and SOPs to supplier communications and product updates, multilingual content is the connective tissue of modern industrial enterprises, and too often, it’s a bottleneck.

Read article →
Why small language models win at the Edge

Why small language models win at the Edge

EEWorld Online Editor June 27, 2026

By Pietro Antonio Ciclese, Senior Technical Marketing Engineer, Ambarella The workloads that generate the most commercial value in edge AI scenarios run under power and thermal constraints that are, to put it mildly, very far from those found in data centers. Take, for example, a vision camera used for surveillance or inspection. These often draw […]

Read article →
Engineering.comDesign WorldR&D WorldThe Robot ReportEE WorldFluid Power WorldMedical Design & Outsourcing
Drug Discovery & DevelopmentPharmaceutical Processing WorldPlant EngineeringConsulting-Specifying EngineerControl EngineeringSolar Power World